ΜΓ 147
Waistcoat of alatzia with broad burgundy stripes, 0.5 cm wide, alternating with composite bands, 1 cm wide, made of blue, yellow, blue, white, blue, yellow and blue stripes. The waistcoat is lined with beige cotton fabric.
The front part consists of four pieces of alatzia: two triangular gores, one on either side of the garment’s opening (bottom side: 18 cm, inner long side: 48 cm, outer long side: 46 cm), and an additional two pieces that complete the facades and carry on to the upper part of the back, at a height of 27 cm. The lower part of the back consists of thick beige loom-woven cotton fabric (height: 28 cm, width: 40 cm). Further down, on the sides of the waistcoat, there is a 6 cm slit.
A low upright collar, 2 cm tall, has a double seam at the base of the neck and is decorated with consecutive lozenges formed with very dense stitch of white thread, probably machine-made. A similar band with a zig-zag row of machine stitching decorates the outer sides of the front pieces, ending just above the hem (7-8 cm). Simple machine stitching of white thread carries on lower still, as well as around the hem. Black braid sets out at 10.5 cm above the bottom end of the front opening, also extending along the edge of the collar. In the front part of the collar (4 cm on either side of the opening) and along the front opening of the waistcoat, tiny consecutive knots are formed over the braid with added sewn-on cord.
On the right side of the breast, a rectangular inside pocket (height: 17.5 cm, width: 11 cm) is formed with thick cotton lining, dyed blue (indigo). In the upper part of the blue lining, an added, 4 cm tall piece of the alatzia used on the waistcoat, may be discerned through the 6.5 cm long horizontal opening of the pocket. The opening is surrounded by a braid of red and blue threads and a decorative band of machine stitching that includes a zig-zag line within two parallel lines. The rectangular shape of the pocket is delimited all around by white machine stitching. At the centre of the upper side, a three-branched ornament is also made with machine stitching.
The long sleeves are sewn vertically to the body and consist of a single piece of fabric with an inseam. Two gussets have been added at the armpit, joined together lengthwise (seam length: 17 cm). At the lower end of the sleeves, the cuffs are made of a separate piece of fabric, 9 cm tall, lined with alatzia other than that of the waistcoat, with blue, red and white stripes. This lining (height: 7.5-8 cm), exposed by the turned-up cuffs, consists of smaller hand-sewn segments. At the bottom end of each sleeve there is a curved-sided opening (height: 8.5 cm). The edge of both sleeves is trimmed with a braid of red and blue threads, the same as the braid along the opening of the pocket. At one point on the sleeve opening, the threads of the braid form a tassel.
This waistcoat shares several features with waistcoat Number 89: same fabric, same trimmings along the edges (machine stitched bands and added braids) and on the pocket. These similarities suggest that the two garments were most likely a set or, at the very least, the work of the same person.
Height: 57 cm.
Width: 41.5 cm on the shoulders, 40 cm at the waist.
Length of sleeves: 49.5 cm.
Width of sleeves: 17.5 cm in the upper part, 15 cm at the bottom.
Date of entry to the Collection: 1978
Provenance: [Undefined] – Purchase.